Daschkiewicz Audio Logo

About

Florian Daschkiewicz

Hello,

my name is Florian Daschkiewicz and I am the founder of Daschkiewicz Audio.
The intention of Daschkiewicz Audio is to conceptualize and build high-performance audio equipment, like power amplifiers, loudspeakers and accessories for home use and professional use.

My enthusiasm for good sound started long ago, when I was a teenager. Meanwhile I gained experience as an event technician for more than 20 years.

The goal is to produce excellent, pure sound that is so close to the original that you feel like you are part of the performance.

Enjoy!

Products

AA1
AA1
ASL1
ASL1
ACS1
ACS1

Please note, that all presented products are for reference use only and can currently not be purchased

AA1

AA1 AA1 AA1 AA1 AA1 AA1

Description

High-performance audiophile Class D amplifier, which combines excellent sound quality with Class D efficiency. The device features an integrated post filter feedback design and a proprietary high-speed gate driver error correction (PurePath™ Ultra-HD).
This technology ensures extremely low distortion across the entire audio frequency range and superior audio quality.
By combining an enhanced input stage and high quality components, the amplifier achieves incredibly low noise and distortion for clear and transparent playback.
The reasonable design is completed by an integrated EMI filter and short cable ways with generous wire diameters.

Technical Data

Amplifier ChipTPA3255
Input ConnectorsRev 1 2x RCA (unbalanced)
Rev 2 2x XLR female (balanced)
Output Connectors2x Binding Post Terminal (up to 4 mm² / AWG12)
Output Power2x 260 W @ 4 Ω (1 % THD+N)
2x 150 W @ 8 Ω (1 % THD+N)
Frequency Response20 Hz - 20 kHz (±0.5 dB)
THD+N0.0007 %
Dynamic Range125 dBA
Output Noise18 µV (A-weighted)
Input Voltage90 - 260 V AC
Electrical Efficiency94 %
Standby Power Consumption0.5 W
Dimensions (W x H x D)220 x 60 x 255 mm
8.66 x 2.36 x 10.03 in
Weight2.4 kg
5.29 lbs

Downloads

User Manual

ACS1

ACS1 ACS1 ACS1

Description

High-performance audiophile speaker cable. Gold-plated banana plugs and double twisted pair cables in a robust fabric tube for enhanced current flow and interference resistance.

Technical Data

Connectors2x Banana Plug
Wire Core MaterialOFC
Wire Diameter2x 1.5 mm²
2x AWG15
Length3 m
9.84 ft

Downloads

No downloads available

ASL1

ASL1 ASL1 ASL1 ASL1 ASL1

Description

The ASL1 can best be described as having a very warm and melodious sound. The two 17 cm (6.5 in) woofers with aluminum membranes in their two separate bass reflex housings produce a voluminous, yet precise bass that you would not expect from such a construction. Even in the deepest bass range, the ASL1 remains clean and clear at higher volumes.

The highlight of the ASL1 is the 50 mm (2 in) midrange dome. It ensures an incredibly spatial stage image in the midrange with good center location, which is not often found. Even recordings that are spatially not perfect still sound good with the ASL1, like separated from the speakers. This makes it possible to enjoy music in a relaxed manner, even over a long period of time.

A ceramic dome is used in the treble range, which rounds off the overall picture with its silky-smooth sound and excellent linearity.

Technical Data

SurfaceBlack Piano lacquer/Walnut
Construction Principle3-way bass reflex
DriversLR: 2x 170 mm / 6.5 in
MR: 1x 50 mm / 2 in
HR: 1x 25 mm / 1 in
Input ConnectorsBinding Post Terminal (up to 4 mm² / AWG12)
Rated Load Capacity140 W
Music Load Capacity200 W
Nominal Impedance4 Ω
Frequency Response30 Hz - 20 kHz (-10 dB)
45 Hz - 25 kHz (-3 dB)
Sound Pressure Level86 dB (1 W/1 m)
Crossover Frequency700 / 3500 Hz
Dimensions (W x H x D)228 x 1150 x 350 mm
9 x 45 x 14 in
Weight25 kg
55.12 lbs

Downloads

Technical Description

Contact


Daschkiewicz Audio
c/o Florian Daschkiewicz


Graz, Austria


+43 681 81321179

Server Error
Please try again later

Contact form not sent

Please fill in all required fields

Contact form not sent

Thank you

You will hear from us shortly

Contact form sent